• 所有问题

    • MASTERCAM中后处理文件中的第四轴A通过修改哪里可以将其去掉?实际加工只有三轴,但出的程序总有A指令存在。

    你知道怎么改吗 ？
    MPFAN。PST

    164. Enable Rotary Axis button? y

    将其修改为：

    164. Enable Rotary Axis button? n
    上面所说的这些我怎么找不到啦? 你知道吗 可以帮帮我吗？ 谢谢

    举报该问题
    其他回答
    第1个回答  2012-07-06
    你到若枫后处理可以学到很多后处理相关的知识。
    打开后处理文件，
    查找
    164. Enable Rotary Axis button? y
    改为
    164. Enable Rotary Axis button? n

    在下面的这个位置

    # --------------------------------------------------------------------------
    # Numbered questions for Mastercam Mill
    # --------------------------------------------------------------------------
    38. Rapid feedrate? 300.0
    1538. Rapid feedrate (metric)? 10000.0
    80. Communications port number for receive and transmit (1 or 2) ? 2
    81. Data rate (110,150,300,600,1200,2400,4800,9600,14400,19200,38400)? 9600
    82. Parity (E/O/N)? E
    83. Data bits (7 or 8)? 7
    84. Stop bits (1 or 2)? 2
    85. Strip line feeds? N
    86. Delay after end of line (seconds)? 0
    87. Ascii, Eia, or Binary (A/E/B)? A
    88. Echo keyboard to screen in terminal emulation? n
    89. Strip carriage returns? N
    90. Drive and subdirectory for NC files?
    91. Name of executable post processor? MP
    92. Name of reverse post processor? RP
    93. Reverse post PST file name? RPFAN
    100. Number of places BEFORE the decimal point for sequence numbers? 3
    101. Number of places AFTER the decimal point for sequence numbers? 0
    103. Maximum spindle speed? 5000
    107. Average time for tool change (seconds)? 2.0

    159. Show first and last position as fully compensated in simulation? n
    161. Enable Home Position button? y
    162. Enable Reference Point button? n
    163. Enable Misc. Values button? y
    164. Enable Rotary Axis button? n
    165. Enable Tool Plane button? n
    166. Enable Construction Plane button? n
    167. Enable Tool Display button? y
    168. Check tplane during automatic work origin creation? n
    # --------------------------------------------------------------------------
    # Default Miscellaneous Real Values
    # --------------------------------------------------------------------------
    201. Default miscellaneous real variable 1 (mr1)? 0.0
    202. Default miscellaneous real variable 2 (mr2)? 0.0
    203. Default miscellaneous real variable 3 (mr3)? 0.0
    204. Default miscellaneous real variable 4 (mr4)? 0.0
    205. Default miscellaneous real variable 5 (mr5)? 0.0
    206. Default miscellaneous real variable 6 (mr6)? 0.0
    207. Default miscellaneous real variable 7 (mr7)? 0.0
    208. Default miscellaneous real variable 8 (mr8)? 0.0
    209. Default miscellaneous real variable 9 (mr9)? 0.0
    210. Default miscellaneous real variable 10 (mr10)? 0.0
    # --------------------------------------------------------------------------
    # Default Miscellaneous Real Values (METRIC)
    # --------------------------------------------------------------------------
    1601. Default miscellaneous real variable 1 (mr1) (metric)? 0.0
    1602. Default miscellaneous real variable 2 (mr2) (metric)? 0.0
    1603. Default miscellaneous real variable 3 (mr3) (metric)? 0.0
    1604. Default miscellaneous real variable 4 (mr4) (metric)? 0.0
    1605. Default miscellaneous real variable 5 (mr5) (metric)? 0.0
    1606. Default miscellaneous real variable 6 (mr6) (metric)? 0.0
    1607. Default miscellaneous real variable 7 (mr7) (metric)? 0.0
    1608. Default miscellaneous real variable 8 (mr8) (metric)? 0.0
    1609. Default miscellaneous real variable 9 (mr9) (metric)? 0.0
    1610. Default miscellaneous real variable 10 (mr10) (metric)? 0.0
    # --------------------------------------------------------------------------
    # Enable/Disable Miscellaneous Real Variable switches
    # --------------------------------------------------------------------------
    1611. Enable miscellaneous real variable 1? y
    1612. Enable miscellaneous real variable 2? y
    1613. Enable miscellaneous real variable 3? y
    1614. Enable miscellaneous real variable 4? y
    1615. Enable miscellaneous real variable 5? y
    1616. Enable miscellaneous real variable 6? y
    1617. Enable miscellaneous real variable 7? y
    1618. Enable miscellaneous real variable 8? y
    1619. Enable miscellaneous real variable 9? y
    1620. Enable miscellaneous real variable 10? y
    # --------------------------------------------------------------------------
    # Default Miscellaneous Integer Values
    # --------------------------------------------------------------------------
    301. Default Work Coordinate System (4 thru 9=G54-G59)? 4
    302. Default miscellaneous integer variable 2 (mi4)? 0
    303. Default miscellaneous integer variable 3 (mi4)? 0
    304. Default miscellaneous integer variable 4 (mi4)? 0
    305. Default miscellaneous integer variable 5 (mi5)? 0
    306. Default miscellaneous integer variable 6 (mi6)? 0
    307. Default miscellaneous integer variable 7 (mi7)? 0
    308. Default miscellaneous integer variable 8 (mi8)? 0
    309. Default miscellaneous integer variable 9 (mi9)? 0
    310. Default miscellaneous integer variable 10 (mi10)? 0
    # --------------------------------------------------------------------------
    # Enable/Disable Miscellaneous Integer Variable switches
    # --------------------------------------------------------------------------
    1621. Enable miscellaneous integer variable 1? y
    1622. Enable miscellaneous integer variable 2? y
    1623. Enable miscellaneous integer variable 3? y
    1624. Enable miscellaneous integer variable 4? y
    1625. Enable miscellaneous integer variable 5? y
    1626. Enable miscellaneous integer variable 6? y
    1627. Enable miscellaneous integer variable 7? y
    1628. Enable miscellaneous integer variable 8? y
    1629. Enable miscellaneous integer variable 9? y
    1630. Enable miscellaneous integer variable 10? y
    # --------------------------------------------------------------------------
    # Configuration File association parameters (default is "y")
    # --------------------------------------------------------------------------
    #400. Name of associated cfg file?
    401. Read SYSTEM COLORS section? y
    402. Read ALLOCATIONS section? y
    403. Read TOLERANCES section? y
    404. Read DATA PATHS section? y
    405. Read COMMUNICATIONS section? y
    406. Read DRAFT SETTINGS section? y
    407. Read MISCELLANEOUS section? y
    408. Read NC SETTINGS section? y
    409. Read DIALOG SCRIPTS section? y
    410. Read DESIGN SETTINGS section? y
    411. Read PLOTTER SETTINGS section? y
    412. Read ALT-KEY ASSIGNMENTS section? y
    413. Read CAD section? y
    414. Read START/EXIT section? y
    415. Read SCREEN section? y
    416. Read FILE NAMES section? y
    1500. Chook to execute from 'Misc. values' button?
    1501. Insert parameter information in the ascii NCI? n
    1502. Write operation information to binary file (.ops)? n
    1503. Write transform operations (0=transform ops, 1=source ops, 2=both)? 1
    1520. Display a warning when cutter compensation in control simulation finds an error? n
    1521. Number of controller look-ahead blocks for CDC in control? 2
    1530. Ignore work offset numbers when processing subprograms? y
    1531. Ignore contour flags when processing subprograms? y
    # Do NOT manually change the answer for Q.1999 !
    1999. Product major version number that post supports? 9
    3001. Machine acceleration? 2
    3002. timing size? .1本回答被网友采纳
    第2个回答  2012-07-05
    几版本的软件，我帮你修改。发给我。追问

    我是mastercamx5 和mastercamx6的

    追答

    推荐答案 不对，

    本回答被提问者采纳
    相似回答
    MASTERCAM中后处理文件中的第四轴A通过修改哪里可以将其去掉?答：1、首先来打开Mastercam 9.1。2、先来查看工作设定里面限制最高转速是多少，如果低于我们设置的编程参数，则把这个值改大。如下图红框画记处。3、从主菜单的刀具路径进入，找到工作设定并点击进入。4、在编程刀具参数设置界面，鼠标右键单击，任意一把已有刀具，进入刀具属性查看对话框，随即进入工作设定。
    mastercam怎样设置取消第四轴A0?答：你之所以会提出这个问题，是不知道在X版里要选择机床文件。mastercam X版支持很多机床，比如三轴、四轴、五轴，立式和卧式，发那科、哈斯等等。之所以后处理出现A0，那是你选择了默认的机床文件。比如立式三轴发那科加工中心选择机床文件方法如下
    怎么关闭掉MASTERCAM X5 默认后处理中的第四轴A0答：你这是选的4轴机床。在机床类型里选：铣削---管理列表，在弹出窗口里找到MILL 3-AXIS VMC. MM. MMD-5,点中间的”增加“，点勾，退出。在重新回到机床类型，就看到你刚才选的机床了，这是立式、三轴、公制机床，他会自动匹配相应的后处理，不会有A的。
    怎么关闭掉MASTERCAM X5 默认后处理中的第四轴A0答：你这是选的4轴机床。在机床类型里选：铣削---管理列表，在弹出窗口里找到MILL 3-AXIS VMC. MM. MMD-5,点中间的”增加“，点勾，退出。在重新回到机床类型，就看到你刚才选的机床了，这是立式、三轴、公制机床，他会自动匹配相应的后处理，不会有A的。
    怎么关闭掉MASTERCAM X5 默认后处理中的第四轴A0答：可以通过修改后处理文件关闭，或者在选择三轴机床文件
    MasterCAM V9在4轴和5轴加工中的应用?答：(5)用修改后的MPGEN5X_FANUC.PST后置处理程序Post后得到的NC文件如图12所示。图7 图8 图9 图10 图11 图12 四、4轴加工的应用 在实际中往往要在某旋转体上加工沟槽形状，利用MasterCAM V9自带的回转功能，通过Contour中置换X或Y轴的功能，可以简单地将三轴问题转换成4轴刀具路径。假设有如图13所示...
    mastercam2022如何把四轴A改成B答：MPFAN.PST） 单击【edit】→【find】按钮，系统弹出查找对话框，输入“G49”。查找结果所在行为：pbld，n，*sgcode，*sgplane，"G40"，"G49"，"G80"，*sgabsinc，e 插入G54指令到当前行，将其修改为： pbld，n，*sgcode，*sgplane，"G40"，"G49"，"G80"，*sgabsinc，"G54"。
    mastercam9.1编的四轴联动程序后处理出来之后,机床加工时A轴反转,怎 ...答：这个问题我也碰到过了，我用的x6版本，按照别人说的方法修改了一下，可是改不过来，你可以试一下。
    masterCAM9.1后处理的第四轴怎么把A轴改成B轴答：这个简单 ：fmt A 11 cabs #C axis position fmt A 14 cinc #C axis position 方法如下：把A改成B即可输出B了。fmt B 11 cabs #C axis position fmt B 14 cinc #C axis position
    大家正在搜
    相关问题
    怎么关闭掉MASTERCAM X5 默认后处理中的第四轴A0
    MasterCAM后处理修改，第四轴替换
    masterCAM9.1后处理的第四轴怎么把A轴改成B轴？
    masterCAM9.1后处理的第四轴怎么把A轴改成B轴
    Mastercam X 4轴后处理文件怎么修改？
    请教MASTERCAM 中第四轴编程（即旋转A轴）的问题！
    MASTERCAM中后处理文件中的第四轴A通过修改哪里可以将...
    mastercam生成的加工中心程序A0(第四轴)对三轴加工...